News

How to Build Your Own Distributed KV Storage System Using the etcd Raft Library (2)

stp2y0 Comments
How to Build Your Own Distributed KV Storage System Using the etcd Raft Library (2)


This is the second article in the series “How to Build Your Own Distributed KV Storage System Using the etcd raft Library” – raftexample Log Compaction and Snapshot.



Introduction

In the first article, we learned and became familiar with the structure of raftexample and the processing flow of a write request. In this article, we will interpret the log compaction and snapshot handling logic in raftexample.



Log Compaction and Snapshot

The Raft log continuously grows as the cluster operates normally and processes client requests. In practical applications, we need a mechanism to limit the unlimited growth of the log to avoid causing availability issues. Raft uses the snapshot mechanism to compact the log, as shown in the figure below:

After creating a snapshot, all committed entries in the Raft log are included in a snapshot. This snapshot compresses and merges the state of the state machine for the last committed entry and all previous entries and saves the Index and Term of the last entry included in the snapshot for consistency checks during the AppendEntries RPC (log synchronization). To support cluster membership changes, the snapshot should also save the latest cluster configuration (for simplicity, this is not shown in the figure).

The timing of snapshot creation is also a topic worth discussing. A simple strategy is to create a snapshot when the log reaches a configured size threshold (in bytes).



Creating Snapshots

1. In raftexample, the strategy for creating snapshots is to do so when the number of log entries reaches a specified threshold. This strategy is executed by the maybeTriggerSnapshot method, which is called every time data is received from the raft library (Ready).

This method first calculates the number of committed log entries since the last snapshot. If this number has not reached the specified threshold (snapCount), it returns immediately without creating a snapshot.

if rc.appliedIndex - rc.snapshotIndex <= rc.snapCount {
    return
}
Enter fullscreen mode

Exit fullscreen mode

Next, it blocks and waits until all the committed log entries received from the raft library that need to be applied (rc.entriesToApply(rd.CommittedEntries)) are applied to the state machine (kvstore) or the server shuts down.

// wait until all committed entries are applied (or server is closed)
if applyDoneC != nil {
    select {
    case <-applyDoneC:
    case <-rc.stopc:
        return
    }
}
Enter fullscreen mode

Exit fullscreen mode

Then the actual snapshot creation logic follows:

  • getSnapshot: Retrieves the JSON serialized data of all key-value pairs stored in the current kvstore state machine;

  • CreateSnapshot: Creates a snapshot. CreateSnapshot calculates the last included index and last included term based on the committed log index (appliedIndex). The snapshot also includes the latest cluster configuration information (confState) and the state of the state machine (data).

This strictly follows the requirements mentioned in the paper that a snapshot must include all necessary information.

  • saveSnap: Writes the created snapshot to disk and records the snapshot metadata in the WAL to enable state recovery from the WAL. 
log.Printf("start snapshot [applied index: %d | last snapshot index: %d]", rc.appliedIndex, rc.snapshotIndex)
data, err := rc.getSnapshot()
if err != nil {
    log.Panic(err)
}
snap, err := rc.raftStorage.CreateSnapshot(rc.appliedIndex, &rc.confState, data)
if err != nil {
    panic(err)
}
if err := rc.saveSnap(snap); err != nil {
    panic(err)
}
Enter fullscreen mode

Exit fullscreen mode

In the implementation of MemoryStorage, since CreateSnapshot does not actually compress the Raft Log, we need to manually call the Compact method to delete all entries before compactIndex. Otherwise, creating snapshots without deleting the Raft Log would render the snapshot creation meaningless. Here, we retain snapshotCatchUpEntriesN log entries while deleting the entries to allow some slow followers to catch up with the leader.

// keep some in memory log entries for slow followers.
compactIndex := uint64(1)
// snapshotCatchUpEntriesN represents the number of log entries retained after a snapshot is triggered.
if rc.appliedIndex > snapshotCatchUpEntriesN {
    compactIndex = rc.appliedIndex - snapshotCatchUpEntriesN
}
if err := rc.raftStorage.Compact(compactIndex); err != nil {
    if err != raft.ErrCompacted {
        panic(err)
    }
} else {
    log.Printf("compacted log at index %d", compactIndex)
}
Enter fullscreen mode

Exit fullscreen mode

Finally, update the snapshot progress to the current last committed log entry.

rc.snapshotIndex = rc.appliedIndex
Enter fullscreen mode

Exit fullscreen mode

2. In addition to nodes creating snapshots periodically based on their snapshot creation strategy, followers may also receive snapshots from the leader to help with log synchronization in cases such as new nodes joining the cluster or log entries lagging too far behind.

When the Snapshot field of Ready is not empty, persist the snapshot, then apply the snapshot (ApplySnapshot), and notify the kvstore module to load the snapshot by sending a nil signal to commitC.

if !raft.IsEmptySnap(rd.Snapshot) {
    rc.saveSnap(rd.Snapshot)
}
// rd.HardState + rd.Entries = persistent state on all servers
rc.wal.Save(rd.HardState, rd.Entries)
if !raft.IsEmptySnap(rd.Snapshot) {
    rc.raftStorage.ApplySnapshot(rd.Snapshot)
    // Send a signal to load the snapshot. 
    // The kvstore will restore the state machine from the snapshot.
    rc.publishSnapshot(rd.Snapshot)
}
Enter fullscreen mode

Exit fullscreen mode

Upon receiving the nil signal, kvstore loads the previously saved snapshot from the disk through saveSnap, and recoverFromSnapshot deserializes the JSON data of all key-value pairs saved in the snapshot to overwrite the state machine’s (map[string]string) storage.

for commit := range commitC {
    // signaled by raftNode.publicSnapshot rc.commitC <- nil
    if commit == nil {
        snapshot, err := s.loadSnapshot()
        if err != nil {
            log.Panic(err)
        }
        if snapshot != nil {
            log.Printf("loading snapshot at term %d and index %d", snapshot.Metadata.Term, snapshot.Metadata.Index)
            if err := s.recoverFromSnapshot(snapshot.Data); err != nil {
                log.Panic(err)
            }
        }
        continue
    }
    ...
}
Enter fullscreen mode

Exit fullscreen mode



Recovering from Snapshots

Through the maybeTriggerSnapshot method, raftexample creates a snapshot and persists it to disk when the log entries reach a set threshold. Next, let’s look at how raftexample uses these snapshots on disk for recovery.

1. During the startup of the raft module, the Raft Log is reconstructed using the replayWAL method.

  • The loadSnapshot method loads the previously saved snapshot from disk using saveSnap.
  • openWAL reconstructs the WAL based on the loaded snapshot’s Index and Term.
  • ApplySnapshot, SetHardState, and Append are used to restore MemoryStorage, which is the Raft Log (MemoryStorage is in-memory, so it needs the WAL for recovery).

The HardState and Entries saved in the WAL were persisted after receiving data in the Ready state.

rc.wal.Save(rd.HardState, rd.Entries)

func (rc *raftNode) replayWAL() *wal.WAL {
    log.Printf("replaying WAL of member %d", rc.id)
    snapshot := rc.loadSnapshot()
    w := rc.openWAL(snapshot)
    _, st, ents, err := w.ReadAll()
    if err != nil {
        log.Fatalf("raftexample: failed to read WAL (%v)", err)
    }
    rc.raftStorage = raft.NewMemoryStorage()
    if snapshot != nil {
        rc.raftStorage.ApplySnapshot(*snapshot)
    }
    rc.raftStorage.SetHardState(st)

    // append to storage so raft starts at the right place in log
    rc.raftStorage.Append(ents)

    return w
}
Enter fullscreen mode

Exit fullscreen mode

After starting the Raft module, in the serveChannels method of raftexample, which handles interactions with the raft library, we can use the Snapshot method to retrieve the snapshot applied to MemoryStorage in replayWAL and reconstruct the current node’s cluster configuration (confState), snapshot index (snapshotIndex), and committed log index (appliedIndex).

snap, err := rc.raftStorage.Snapshot()
if err != nil {
    panic(err)
}

rc.confState = snap.Metadata.ConfState
rc.snapshotIndex = snap.Metadata.Index
rc.appliedIndex = snap.Metadata.Index
Enter fullscreen mode

Exit fullscreen mode

2. Besides the raft module reconstructing the Raft Log from snapshots, the kvstore module also recovers the state machine using snapshots.

Similarly, it uses loadSnapshot to load the snapshot and then recoverSnapshot to deserialize the JSON data to recover the state machine.

func newKVStore(snapshotter *snap.Snapshotter, proposeC chan<- string, commitC <-chan *commit, errorC <-chan error) *kvstore {
    s := &kvstore{proposeC: proposeC, kvStore: make(map[string]string), snapshotter: snapshotter}
    snapshot, err := s.loadSnapshot()
    if err != nil {
        log.Panic(err)
    }
    if snapshot != nil {
        log.Printf("loading snapshot at term %d and index %d", snapshot.Metadata.Term, snapshot.Metadata.Index)
        if err := s.recoverFromSnapshot(snapshot.Data); err != nil {
            log.Panic(err)
        }
    }

    go s.readCommits(commitC, errorC)
    return s
}
Enter fullscreen mode

Exit fullscreen mode



Summary

That’s all for this article. We have analyzed the log compaction and snapshot handling logic in raftexample from two perspectives: creating snapshots and recovering from snapshots. I hope this helps you better understand how to use the etcd raft library to build your own distributed KV storage service.

If there are any mistakes or issues, please feel free to comment or message me directly. Thank you.



References



Source link
lol

By stp2y

Leave a Reply

Your email address will not be published. Required fields are marked *

No widgets found. Go to Widget page and add the widget in Offcanvas Sidebar Widget Area.